Year diagnostics

2007 Mustang Codes

Common OBD-II powertrain codes for the 2007 Mustang, grouped by system. This is a practical starter library, not a complete Ford PC/ED code database.

Back to 2007 facts All code groups

Before Diagnosis

Air Metering & Sensor Input Codes

Mass-airflow, intake-air-temperature, and manifold sensor faults that can make the PCM calculate the wrong fuel and spark strategy.

View group page
P0101 Mass Air Flow Sensor Range/Performance The PCM sees mass-airflow data that does not match expected engine load. P0113 Intake Air Temperature Sensor Circuit High The PCM sees an intake-air-temperature signal that is higher than the normal circuit range. P0340 Camshaft Position Sensor Circuit The PCM sees an electrical or signal fault in a camshaft position sensor circuit.

Catalyst Efficiency Codes

Catalyst monitor codes that compare upstream and downstream oxygen-sensor activity to judge converter efficiency.

View group page
P0420 Catalyst System Efficiency Below Threshold, Bank 1 The PCM sees downstream oxygen-sensor behavior that suggests bank 1 catalyst efficiency is below threshold. P0430 Catalyst System Efficiency Below Threshold, Bank 2 The PCM sees downstream oxygen-sensor behavior that suggests bank 2 catalyst efficiency is below threshold.

Cooling & Temperature Codes

Coolant temperature, warm-up, and thermostat codes that can affect emissions, driveability, and overheat diagnosis.

View group page
P0128 Coolant Thermostat Below Regulating Temperature The engine is taking too long to reach the expected coolant temperature.

EGR & Secondary Air Codes

Exhaust-gas-recirculation and secondary-air monitor faults found mostly on older OBD-II Mustangs.

View group page
P0401 EGR Flow Insufficient The PCM commands EGR but does not see enough exhaust-gas flow. P0402 EGR Flow Excessive The PCM sees more EGR flow than expected.

EVAP Leak & Purge Codes

Evaporative-emissions leak, purge, vent, and pressure-sensor faults that often start with a loose cap or damaged vapor hose.

View group page
P0442 EVAP System Small Leak Detected The EVAP monitor detects a small leak in the fuel-vapor system. P0455 EVAP System Gross Leak Detected The EVAP monitor detects a large vapor leak. P0456 EVAP System Very Small Leak Detected The EVAP monitor detects a very small vapor leak. P0457 EVAP System Leak Detected/Fuel Cap Loose The PCM detects an EVAP leak pattern often associated with the fuel cap or filler seal.

Fuel Pressure & Delivery Codes

Fuel-pressure sensor, pump, and rail-pressure faults that can overlap with lean, rich, and misfire symptoms.

View group page
P0191 Fuel Rail Pressure Sensor Range/Performance The PCM sees fuel-rail pressure data outside the expected range for operating conditions. P0231 Fuel Pump Secondary Circuit Low The PCM sees low voltage in the fuel-pump secondary circuit.

Fuel Trim & Mixture Codes

Lean or rich mixture codes usually mean the PCM has reached the limit of how much fuel it can add or subtract to keep the engine in range.

View group page
P0171 System Too Lean, Bank 1 The PCM is adding too much fuel on bank 1 because the mixture is lean. P0172 System Too Rich, Bank 1 The PCM is subtracting too much fuel on bank 1 because the mixture is rich. P0174 System Too Lean, Bank 2 The PCM is adding too much fuel on bank 2 because the mixture is lean. P2195 Bank 1 Sensor 1 Oxygen Sensor Signal Biased/Stuck Lean The upstream oxygen sensor signal on bank 1 appears stuck lean or biased lean. P2197 Bank 2 Sensor 1 Oxygen Sensor Signal Biased/Stuck Lean The upstream oxygen sensor signal on bank 2 appears stuck lean or biased lean.

Misfire Codes

Random and cylinder-specific misfire codes caused by ignition, fuel delivery, compression, or air-leak problems.

View group page
P0300 Random/Multiple Cylinder Misfire Detected The PCM detects misfires that are not isolated to one cylinder. P0301 Cylinder 1 Misfire Detected The PCM detects a misfire on cylinder 1. P0302 Cylinder 2 Misfire Detected The PCM detects a misfire on cylinder 2. P0303 Cylinder 3 Misfire Detected The PCM detects a misfire on cylinder 3. P0304 Cylinder 4 Misfire Detected The PCM detects a misfire on cylinder 4. P0305 Cylinder 5 Misfire Detected The PCM detects a misfire on cylinder 5. P0306 Cylinder 6 Misfire Detected The PCM detects a misfire on cylinder 6. P0307 Cylinder 7 Misfire Detected The PCM detects a misfire on cylinder 7. P0308 Cylinder 8 Misfire Detected The PCM detects a misfire on cylinder 8. P0316 Misfire Detected on Startup The PCM detects a misfire soon after engine start.

Oxygen Sensor & Heater Codes

Front and rear oxygen-sensor circuit, response, and heater faults that affect fuel control or catalyst monitoring.

View group page
P0133 Bank 1 Sensor 1 Oxygen Sensor Slow Response The upstream oxygen sensor on bank 1 is switching more slowly than expected. P0135 Bank 1 Sensor 1 Oxygen Sensor Heater Circuit The upstream bank 1 oxygen-sensor heater circuit is not operating as expected. P0153 Bank 2 Sensor 1 Oxygen Sensor Slow Response The upstream oxygen sensor on bank 2 is switching more slowly than expected. P0155 Bank 2 Sensor 1 Oxygen Sensor Heater Circuit The upstream bank 2 oxygen-sensor heater circuit is not operating as expected.

Throttle & Idle Control Codes

Idle-air-control faults on cable-throttle cars and electronic-throttle faults on later Mustangs.

View group page
P0506 Idle Air Control System RPM Lower Than Expected Idle speed is lower than the PCM expects. P0507 Idle Air Control System RPM Higher Than Expected Idle speed is higher than the PCM expects. P2104 Throttle Actuator Control System Forced Idle The PCM has limited throttle control and forced idle as a protective response. P2111 Throttle Actuator Control System Stuck Open The PCM sees the electronic throttle stuck more open than commanded. P2112 Throttle Actuator Control System Stuck Closed The PCM sees the electronic throttle stuck more closed than commanded.

Sources

  1. SAE J2012DA Digital Annex of Diagnostic Trouble Code Definitions
  2. 1996 Ford Mustang Owner Guide